About This Item
Description
Jet Lube KOPR-KOTE 10012 Heavy-Duty, Lead-Free Drill Pipe Compound NSF H2 2 Gal. Pail
- Not classified as marine pollutant - DOT Approval
- CA2004080025
- NSF Registered H2 (No. 120923)
- Conforms to MIL-PRF-907E
- Service rating: -65Deg F (-54Deg C) to 1800Deg F (982Deg C).
- Contains no lead or zinc.
- Lowers friction; reduces wrench torque.
- Permits reuse of fittings; saves stud, bolt, and nut
- replacement.
- Aluminum complex base for brushability and stability
- over a wide temperature range.
- Not affected by contraction, expansion, or vibration.
- Will not run, drip, or settle out.
- Available in convenient aerosol form.
KOPR-KOTE is a low-friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite dispersed in a water-resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors. KOPR-KOTE contains CZ-EX: JET-LUBE's EP additive, providing protection unequalled by competitive brands. KOPR-KOTE provides a shield against metal-to-metal contact, preventing seizure and corrosion. It fills irregularities and imperfections and resists welding, hardening, or setting. KOPR-KOTE provides low friction and cushions impact and shock loads. Low shear between particles reduces stick-slip, allowing quick disassembly with minimum wrench torque. It will not squeeze out of the threads, gum up, or wash off. Sizes: 1/4 lb, 1/2 lb, 1 lb, 2 lb, 12 oz aerosol, 14 oz cart, 1 gal, 2-1/2 gal, 5 gal
- Thickener Aluminum Complex
- Fluid Type Petroleum
- Dropping Point (ASTM D-566) 450Deg F (232Deg C)
- Specific Gravity 1.15
- Density (lb/gal) 9.6
- Oil Separation (ASTM D-6184) <3.0
- WT. % LOSS @ 212Deg F (100Deg C)
- Flash Point (ASTM D-92) >450Deg F (232Deg C)
- K-Factor .15
- 1" B7 Studs @ 80,000 psi Contact Stress
- Penetration @ 77Deg F (ASTM D-217) 310 - 330
- Copper Strip Corrosion 1A
- (ASTM D-4048)
- 4-Ball (ASTM D-2596)
- Weld Point, kgf 800
- Load Wear Index 125
Product Features
Extended Information
Technical Specs
*The list price may not necessarily be the price at which the product or service is sold.
